Mã sp:IES2448C
48 10/100M Fast Ethernet ports, 2×10/100/1000M TX, 2×1000M SFP Slots 1 CONSOLE, and standard AC power supply"
MODEL: IES2448C
48 TX + 2 GTX + 2 GSFP Ethernet Switch
Bảo hành: 36 tháng
Mô tả sản phẩm
Pictures: View larger image
Introduction:
3onedata IES2448C is the next-generation hi-performance L2 Ethernet switch with 48 Fast Ethernet ports, plus 4 gigabit ports. It has advanced architecture, 36Gbps switch fabric, and 13.1 Mpps forwarding rate. Its hardware wire-speed switching capability provides a powerful, multi-layer solution not only for enterprises, but also for Internet Service Providers (ISP’s) and telecom carriers.
Features:
◎Performance
1. 36 Gbps switch fabric, hardware routing, wire-speed L2 forwarding rate: 13.1 Mpps
2. High port density.48 Fast Ethernet ports,2 Gigabit Ethernet ports,2 Gigabit SFP slots
3. 80-km transfer by Gigabit optical fiber, direct connection to WAN
◎Security and reliability
1. IEEE 802.1x and other methods for user authentication
2. Powerful ACL supports L2-L7 data filtering
3. Intelligent forwarding, complete defense against viruses like ‘Code Red’ or ‘Blaster’
4. RPS power hot standby
5. QinQ support. Double VLAN security
◎Easy maintenance
1. Automatic recognition for straight-through or cross-over cables
2. Stackable physically and through cluster technology. Central management with unified IP address saves IP addresses
3. Management via CONSOLE port, Web, SNMP, Telnet, etc.
4. Support Broad Director, HP Open View, Cisco Works 2000
◎Traffic and broadcast control
1. Auto-detection and restraining of broadcast storm, IGMP snooping, effectively restrict broadcast flooding
2. Full- and half- duplex traffic control
3. Ethernet port rate limiting with 1 M step size
4. L2 multicast and QoS support
5. Jumbo frame
Specification:
Interface
Port & Slot: 48×10/100M TX, 2×10/100/1000M TX, 2×GSFP slots
Console Port :RS-232(RJ45 connector)
LED Indicators: Power, system, link, activity, 10/100M
Switch Properties
Support standard: IEEE 802.1d Spanning Tree Protocol, IEEE 802.1p Class of Service, IEEE 802.1q tagged VLAN,IEEE 802.3x Flow control, IEEE 802.3ad Link aggregation
Network management standard: RFC 1213 MIB II,RFC 1493 Bridge MIB,RFC 1643 Ether-Like MIB
Stacking: Hardware stack upto 16,software stack up 32
Switch Fabric: 36 Gbps
Forwarding Rate: 13.1 Mpps
Switching Mode: Store-and-forward
MAC address Table Size: 8 K
L2 multicast groups Table:4K
Queuing Buffer: 64 MB
802.1Q VLAN:1~4094,partition at will
Jumbo frame: 2K
Technology
Spanning Tree: IEEE 802.1D STP, IEEE 802.1w RSTP
VLAN: Port-based VLAN, 802.1Q tag VLAN, Private VLAN, GVRP dynamic VLAN configuration,
Traffic Control: Back pressure at half-duplex, 802.3x at full-duplex, CAR support, 1M step size for 100M ports, 8 M step size for Gigabit ports
Storm Control: Broadcast, multicast, DLF
Multicast Control: IGMP snooping
DHCP: DHCP snooping, DHCP option 82, IP source guard
Port Trunking: Up to 6 groups with up to 8 ports per group, dynamic LACP or static aggregation
Port Mirroring: Supported. Can be based on flow classification
Clustering: Up to 256, manageable through single IP
Security: IEEE 802.1x port-based user authentication
MPLS Martini
QinQ double VLAN security
Port Security
Hardware support for IP ACL, MAC ACL, VLAN ACL
Port-based user authentication by combinations and bandings of port, IP address, and MAC address
Web user authentication
Remote authentication through RADIUS,TACACS+
User privilege classification and password protection
QoS: Head Of Line (HOL) blocking prevention mechanism
4 dispatching queues per port, mapping the 8 priority queues in 802.1p
WRED,WFQ,SP, and FIFO queuing algorithms
Best Effort Service
Differentiated Service
Strict Priority
Weighted Round Robin
First Come First Serve
TOS re-tagging
RTS
DHCP:DHCP snooping, DHCP option 82
Network Management: SNMP v1/v2,RMON (Group 1, 2, 3, 9),Telnet,Command Line Interface (CLI),Web interface,Support network management tools suite: Broad Director,NTP,SSH,PDP(compatible with Cisco CDP)
Software Upgrade: TFTP/FTP
Configuration Upload/download: TFTP/FTP
Environment, Power and Dimension
Temperature: Operating: 0 ~ 50°C, non-operating: -40 ~ 70°C
Humidity: 0 ~ 90% (no condensing)
Power Consumption: 40 W (max.)
Power Input: AC 100 ~ 240 V, 47 ~ 63 Hz, 1A/230V
Dimensions (L×W×H) : 442mm×316 mm×44 mm
Weight: 6.6kg
Warranty: 3 years
Approvals: FCC,CE, RoHS approvals