Mã sp: FSD-604HP
Hardware Specifications
Network Connector
6-port RJ45 for 10/100BASE-TX, auto MDI/MDIX
PoE Inject Port
4-port with 802.3af/at PoE injector function (Port-1 to Port-4)
LED Display
System: Power (Orange) Per PoE port: PoE (Orange, Port 1 to Port 4) LNK/ACT (Green, Port 1 to Port 6)
DIP Switch
100m distance in standard mode 250m distance in extend mode (based on the cable category)
Switch Architecture
Store and Forward switch architecture
MAC Address Table
2K MAC address table with auto learning function
Switch Fabric
1.2Gbps
Switch Throughput
0.89Mpps @64bytes
Maximum Packet Size
1536bytes
Flow Control
Back pressure for half duplex. IEEE 802.3x pause frame for full duplex
Power Requirements
AC 100~240V, 2A max.
Power Consumption
Max. 63 watts, 214 BTU
Dimensions (W x D x H)
168 x 93 x 32 mm
Weight
499g
ESD Protection
Contact discharge of ±4KV DC Air discharge of ±6KV DC
Surge Immunity
±4KV
Power over Ethernet
PoE Standard
IEEE 802.3af Power over Ethernet/PSE IEEE 802.3at Power over Ethernet Plus/PSE
PoE Power Supply Type
End-span
Power Pin Assignment
1/2(+), 3/6(-)
PoE Power Output
Per Port 52V DC, 300mA. max. 15.4 watts (IEEE 802.3af) Per Port 52V DC, 600mA. max. 30 watts (IEEE 802.3at)
PoE Power Budget
60 watts
Number of PDs, 7 watts
4
Number of PDs, 15.4 watts
Number of PDs, 30 watts
2
Standard Conformance
EMI Safety
CE, FCC
Standard Compliance
IEEE 802.3 Ethernet IEEE 802.3u Fast Ethernet IEEE 802.3x Flow Control IEEE 802.3af Power over Ethernet IEEE 802.3at Power over Ethernet Plus
Environment
Operating Environment
0 ~ 50 degrees C
Storage Environment
-10 ~ 70 degrees C
Operating Humidity
5 ~ 95%, relative humidity, non-condensing
Storage Humidity
Ordering Information
4-Port 10/100TX 802.3af/at PoE + 2-Port 10/100TX Desktop Switch