Lapp Kabel 0034062
Mã sản phẩm : 0034062
Cáp LAPP KABEL ( 0034062 ) 4 x 2 x 0.5mm2. UNITRONIC Li2YCY PiMF 4x2x0.5
Application range
- For increased requirements for near-end cross-talk attenuation and in the case of high electrical interference in the circuits
- Suitable for the transmission in case of varying signal levels in the circuits and with weak, sensitive signals
- Versatile applications for computer systems, electronic control and regulating devices, office machines, scales etc.
- For measurement value transmission and serial 2-wire interfaces
- Intended for limited flexible use, and for fixed installation in dry or damp interiors
Product features
- Flame-retardant according to IEC 60332-1-2
Design
- 7-wire or fine-wire (from 1 mm²) strands made of bare copper wires
- Core insulation made of polyethylene (PE)
- Cores twisted into pairs
- Foil wrapping, static shielding made of aluminium-laminated plastic film with copper drain wire over each pair
- Bare copper braiding
-
Outer sheath made of PVC
Outer sheath colour: pebble grey (RAL 7032)
Classification
- ETIM 5.0 Class-ID: EC000104
- ETIM 5.0 Class-Description: Control cable
-
Core identification code
-
0.22 mm²-0.5 mm²:
according to DIN 47100, see table T9 -
1.0 mm²:
a-core: white, b-core: black -
Operating capacitance
-
At 800 Hz:
0.22 mm²: max. 70 nF/km
0.34 mm²: max. 70 nF/km
0.5 mm²: max. 75 nF/km
1.0 mm²: max. 85 nF/km -
Peak operating voltage
-
(not for power applications)
250 V -
Inductance
- approx. 0.4 mH/km
-
Conductor design
- Stranded wire, based on VDE 0881, 7-wire
-
Minimum bending radius
- Occasional flexing: 20 x outer diameter
- Fixed installation: 10 x outer diameter
-
Test voltage
- Core/Core: 2000 V
- Core/Shield: 1000 V
-
Characteristic impedance
- approx. 85 ohm(> 1 MHz)
-
Temperature range
- Occasional flexing: -5°C to +70°C
- Fixed installation: -40°C to +80°C