Lapp kabel 1119645

Benefits

• Wide choice of standardized lengths and individual cuts
• Very broad range, items with up to 100 conductors

Application range

• For fixed installation as well as occasional flexing at free, non-continuously recurring movement without tensile load
• Dry or damp rooms that are subject to medium mechanical loads
• Suitable for torsional applications which are typical for the loop in wind turbine generators (WTG)
• In power chains for a travelling distance up to 5 m and 0,2 ... 1 million bending cycles, for following dimensions: 0,5 to 2.5mm² and 2 to 7 conductors

Product features

• Flame-retardant according IEC 60332-1-2
• Good chemical resistance, see catalogue appendix T1
• Oil-resistant according to DIN EN 50290-2-22 (TM54)

Norm references / Approvals

• VDE reg. no. 7030 for the following sizes:up to 2.5 mm²: 2 - 65 coresfrom 4 mm²: 2 - 7 coresfrom 25 mm²: 2 - 5 cores

Product Make-up

• Fine-wire strand made of bare copper wires
• PVC insulation LAPP P8/1
• Cores twisted in layers
• PVC outer sheath, grey (similar RAL 7001)

• Classification

  • ETIM 5.0 Class-ID: EC000104
  • ETIM 5.0 Class-Description: Control cable
  • 

  Core identification code

  • Black with white numbers acc. to VDE 0293-1
  • 

  Conductor stranding

  • Fine wire according to DIN EN 60228 (VDE 0295), class 5 / IEC 60228 class 5
  • 

  Torsion movement in WTG

  • TW-0 & TW-1, refer to Appendix T0
  • 

  Minimum bending radius

  • Occasional flexing: 10 x outer diameter
    In power chains: 15 x outer diameter
  • Fixed installation: 4 x outer diameter
  • 

  Nominal voltage

  • U0/U: 300/500 V
  • 

  Test voltage

  • 4000 V
  • 

  Protective conductor

  • G = with GN-YE protective conductor
  • X = without protective conductor
  • 

  Temperature range

  • Occasional flexing: -15°C to +70°C 
    In power chains: -5°C to +70°C
  • Fixed installation: -40°C to +80°C
  •